V2 Part List
1x RED 5mm Pre Wired 12v Led Diffused Lens Lamp Light
1 x GREEN 5mm Pre Wired 12v Led Diffused Lens Lamp Light
1/2 x 10ft Audio Patch Cable 3.5mm 1/8 Mono Male Plug to 3.5mm 1/8 Mono Male
2 x N52 12mm X 2mm Super Strong Round Disc Magnets Rare Earth Neodymium magnet
2 x Water Level Liquid Sensor Fish Tank Pool Float Switch MA
1 x Round Clear Plastic Storage Tubes, NEW, 3 1/8" Tall and over 3/4" Wide
1 x DC 12V 1A AC Power Adapter Switching Power Supply
1 x Mini DC 12V 3M Brushless Motor Submersible Water Pump Cooling System
1 x ABS Black Plastic Project Box, 1" x 3" x 2" - Lot of 12 ( PB114A )
1 x Clear Suction Cup Clip Holders for Aquarium Air line Tubing 1/4"
1 x 5.5mm x 2.1mm DC Power Jack Socket Female Panel Mount Connector plug Copper
1 x 1/8" 3.5mm Mono Audio Female Jack Socket
1 x 6ft 3.5mm 4 Conductor / 3 Band + Mic or Video M/F EXTENSION Cable
1x One Way Check Valve Non-Return Fish Tank
1 x Lever Style LED Round Switch Green 12v on off toggle
Activated Carbon
Tubing
1x RED 5mm Pre Wired 12v Led Diffused Lens Lamp Light
1 x GREEN 5mm Pre Wired 12v Led Diffused Lens Lamp Light
1/2 x 10ft Audio Patch Cable 3.5mm 1/8 Mono Male Plug to 3.5mm 1/8 Mono Male
2 x N52 12mm X 2mm Super Strong Round Disc Magnets Rare Earth Neodymium magnet
2 x Water Level Liquid Sensor Fish Tank Pool Float Switch MA
1 x Round Clear Plastic Storage Tubes, NEW, 3 1/8" Tall and over 3/4" Wide
1 x DC 12V 1A AC Power Adapter Switching Power Supply
1 x Mini DC 12V 3M Brushless Motor Submersible Water Pump Cooling System
1 x ABS Black Plastic Project Box, 1" x 3" x 2" - Lot of 12 ( PB114A )
1 x Clear Suction Cup Clip Holders for Aquarium Air line Tubing 1/4"
1 x 5.5mm x 2.1mm DC Power Jack Socket Female Panel Mount Connector plug Copper
1 x 1/8" 3.5mm Mono Audio Female Jack Socket
1 x 6ft 3.5mm 4 Conductor / 3 Band + Mic or Video M/F EXTENSION Cable
1x One Way Check Valve Non-Return Fish Tank
1 x Lever Style LED Round Switch Green 12v on off toggle
Activated Carbon
Tubing
Build Instructions
1. Drill holes in the project box for LED Switch (Front Center), 2 LEDs (Front Center), Mono Jack (Left), and Female end of 4 conductor cable (Right) DC Power Jack Socket (Bottom).
2. Follow wiring diagram for soldering connections.
3. Solder 3.5mm Mono jack to float switch.
4. Super glue one magnet to inside of small suction cup.
5. Super glue float switch (wire side down) to pump.
6. Use tubing to connect one way valve to pump.
7. Solder float switch and pump wires to 3.5mm 4con cable.
8. Drill holes in bottom of clear tube and one in cap to fit on pump and fill with activated carbon.
Happy Innovating!
1. Drill holes in the project box for LED Switch (Front Center), 2 LEDs (Front Center), Mono Jack (Left), and Female end of 4 conductor cable (Right) DC Power Jack Socket (Bottom).
2. Follow wiring diagram for soldering connections.
3. Solder 3.5mm Mono jack to float switch.
4. Super glue one magnet to inside of small suction cup.
5. Super glue float switch (wire side down) to pump.
6. Use tubing to connect one way valve to pump.
7. Solder float switch and pump wires to 3.5mm 4con cable.
8. Drill holes in bottom of clear tube and one in cap to fit on pump and fill with activated carbon.
Happy Innovating!
RSS Feed
